FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Solenoid Back-Up (Reverse) Inhibitor, Replacing






Solenoid back-up (reverse) inhibitor, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Preparations

S60R (B5254T4 engine)
Remove the center console. See Center console, replacing Center Console, Replacing.

S60 (other engines)
Remove the center console. See Center console, replacing Center Console, Replacing (-2004) or Center console, replacing Center Console, Replacing (2005-).




Disconnect the top panel from the gear selector assembly stop.
Disconnect the mechanical cable from the gear selector assembly.
To access the mechanical cable lock, put the gear selector in P
Disconnect the top panel from gear selector assembly. Twist the top panel to the right.
Remove the mechanical cable lock from the gear selector lever. Use pliers. Pull the lock out of the bushing.
Angle the mechanical cable out of the way.
Remove the mounting bracket for the solenoid.

Removing the solenoid




Shift the gear selector to position D.

Hint: Check that the positive and negative terminals are in the correct position on the solenoid.

Disconnect the cable terminals.
Carefully pull the solenoid up out of the gear selector assembly.

Installing the solenoid




Install the solenoid in the gear selector assembly cut-out. The cable terminals must be upwards in the gear selector assembly.
Secure the solenoid with the bracket.
Connect the cable terminals.

Finishing




Move the gear selector to position P.
Install the mechanical cable lock onto the bushing on the mechanical cable.
Press the mechanical cable into place on the gear selector assembly.
Install the top panel on the gear selector assembly.

Note! Check that the mechanical cable and catches are secure.

Fold and press the top panel into place in the gear selector assembly stop.

S60R (B5254T4 engine)
Install the center console. See Center console, replacing Center Console, Replacing.

S60 (other engines)
Install the center console. See Center console, replacing Center Console, Replacing (-2004) or Center console, replacing Center Console, Replacing (2005-).