Ultrasonic Sensor: Service and Repair

Movement sensor










Movement sensor

Note! This accessory is connected to the car's electrical system. It requires software unique to the car.

Illustration A applies to the S60 and the S80





Illustration B applies to the V70




- Remove the cover (1).




- Remove the cable (1) from its position (4) on the cover (3)
- Install the movement sensor (2) on the cover (3) by pressing the sensor into place
- Connect the cable (1)
- Reinstall the cover and the movement sensor in the roof.

- Program the software according to the service information in VIDA.