Front Sill Trim

Front sill trim

Removing the front sill trim




- Remove the rivet on the fender liner according to Removing rivet .




- Remove the five clips.
- Insert a hand between the A-post and the open door.
- Detach the fasteners and press outwards.
- Remove the two clips from the door seal (2).
- Remove the lower rivet from the fender liner.




Remove the cover by pulling upwards at an angle and then forwards.

Installing the front sill trim

Install:
In reverse order.

Hint: Heat the rear clip so that it flattens out. Otherwise the door sill will not align.