Upholstery and Backrest Cushion, Auxiliary Rear Facing Seat, Replacing

Upholstery and backrest cushion, auxiliary rear facing seat, replacing

Removing the backrest upholstery and foam




- Detach the bottom edge of the upholstery by pulling it straight out
- Always pull at the mounting points
- Remove the four screws. Remove the staples on each side of the opening handle.

Installing backrest upholstery and foam
- Install four screws
- Install staples or double-sided adhesive tape (P/N: 1161590)
- Secure the lower edge of the upholstery.