Hood Hinge: Service and Repair

Hinges, hood, replacing

Hinges, hood, replacing
The hood hinge is fastened to the hood with two screws and to the bodywork by three screws.
The hood is opened using a gas strut.




Remove the retaining clips from gas strut.
Remove the gas strut.
Remove the three screws on the upper edge of the fender.
Remove the upper screw for the fender on the A-post.
Unscrew the screws by the hood.
Remove the hood.
Unscrew the screws in the bodywork.
Remove the hood hinge.

Install:
in reverse order.