Signal Specifications, Road Traffic Information (RTI)

Signal specification, RTI

Connecting the breakout box and checking the ground terminal

Note! Before taking readings, the breakout box must be connected and the ground terminal must be checked.

Definitions






RTI control module




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
The RTI control module terminals A1-A22 correspond to terminals #1-#22 on the breakout box.






RTI control module (to TV receiver)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
The RTI control module terminals B1-B14 correspond to terminals #43-#56 on the breakout box.






RTI control module (to display)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
The RTI control module terminals C1-C16 correspond to terminals #25-#40 on the breakout box.






RTI control module (to CD-ROM changer)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
The RTI control module terminals D1-D6 correspond to terminals #42-#47 on the breakout box.






RTI control module (to audio unit)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
The RTI control module terminals E1-E8 correspond to terminal #16-#23 on the breakout box.






RTI control module (to TV receiver)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
The RTI control module terminals F1-F13 correspond to terminals #1-#13 on the breakout box.






RTI control module (to GPS antenna, gray connector)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.






RTI control module (to TMC (FM-MPX) antenna, brown connector)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.






RTI control module (to FM-MPX antenna, green connector)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.






Display (to RTI control module and "chassis")




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
Display terminals J1-J22 correspond to terminals #1-#22 on the breakout box.






CD-ROM changer (to RTI control module and "chassis")




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
CD-ROM changer terminals K1-K5 correspond to #26-#30 on the breakout box.






CD-ROM changer (to RTI control module)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
CD-ROM changer terminals L1-L6 correspond to #26-#31 on the breakout box.






TV receiver (to RTI control module)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
TV receiver terminals M1-M16 correspond to terminals #25-#40 on the breakout box.






TV receiver (to reverse camera and video)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
TV receiver terminals N1-N10 correspond to #47-#56 on the breakout box.






TV receiver (to RTI control module)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
TV receiver terminals O1-O8 correspond to terminals #16-#23 on the breakout box.






TV receiver (to CD player)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.
TV receiver terminals P1-P13 correspond to terminals #1-#13 on the breakout box.






TV receiver (to TV tuner A)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.






TV receiver (to TV tuner B)




Before taking any readings, see Connecting the breakout box and checking the ground terminal.