5. Verification

Verification







HINT: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Gear shift sensor in position D.
- Try to start the engine. It should not now be possible to start the engine.
- Ignition off.
- Gear-shift position sensor in position P or N.
- Try to start the engine. It should now be possible to start the engine.

Was the function OK?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Refer to Fault-Tracing Information - Permanent Fault. Fault-Tracing Information - Permanent Fault