Removal and Replacement

Installing wheels

Special tools:
951 2834 Torque socket 21mm S/V40 951 2834 Torque Socket 21mm

Installing wheels




Ensure that the brake disk and wheel rim mating surfaces are clean. Grease the hub center location dowel for the rim. Use rustproofing agent 1161030-0 .
Install the wheel studs lightly. Then tighten crosswise to 110 Nm . Use torque socket 951 2834 Torque socket 21mm S/V40 951 2834 Torque Socket 21mm if an impact wrench is being used.
Crosswise tightening and torque tightening is important to prevent stresses in the brake disc.

Note! The torque socket is designed for use with a standard, air-powered impact wrench providing a torque of 250-350 Nm.