Handling Replaced SRS Airbags/Seat Belt Tensioners

Handling replaced SRS airbags/seat belt tensioners

Handling




Non-deployed airbag modules/pyrotechnical seat belt tensioners must not be deployed either in the car or when removed.
Remove them according to instructions.
- Steering wheel with switches Steering Wheel With Switches
- Panel and SRS passenger airbag module Panel and SRS Passenger Airbag Module
- SRS (Airbag)
Replaced airbag modules/pyrotechnical seat belt tensioners should be returned to Volvo according to standard procedures.

Warning! Airbag modules/pyrotechnical seat belt tensioners must never be taken apart, repaired or transferred to another vehicle.

Warning! Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed airbag/pyrotechnical seat belt tensioner. This could deploy the airbag/pyrotechnical seat belt tensioner!

Storage and transport




When storing or transporting airbag modules/pyrotechnical seat belt tensioners, they should be handled according to statutory requirements.