Rear Window Wiper Blade Park Position, Adjusting

Rear Window Wiper Blade Park Position, Adjusting

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331)

- Allow the wiper to move to the park position.

The space - A - between the wiper blade lip and the lower edge of the window must be 20 +/- 5 mm.






- If necessary, adjust the rear window wiper park position by repositioning the wiper arm on the wiper motor shaft.

- Tighten the nut on the wiper arm to the tightening specification given in the overview. Refer to => [ Rear Window Wiper System Overview ] Rear Window Wiper System Overview.