High-Mounted Brake Lamp Bulb (M25)

High-Mounted Brake Lamp Bulb (M25)

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Remove the lower rear lid trim panel..

- Push the black cover - 1 - - in direction of arrow - with a screwdriver until it comes off the high-mounted brake lamp.






- Remove the high-mounted brake lamp bulb through the opening in the rear lid.






- Disengage and disconnect the harness connector - 1 - and remove the high-mounted brake lamp - 2 -.

• The clips will loosen when removing the high-mounted brake lamp. Remove the cover and all the clips from the rear lid.

Installation

Install in reverse order of removal. Note the following:

- Connect the connector.

- Install the high-mounted brake lamp into the opening in the body and lock it into place by sliding the cover all the way to the right.