Crankshaft Axial Clearance, Checking

Crankshaft Axial Clearance, Checking

Special tools, testers and auxiliary items required

• Dial Gauge Holder (VW 387)

• Dial Gauge 0-10 mm (VAS 6079)

Sequence






- Install the dial gauge to the cylinder block using the dial gauge holder (VW 387) and position it against the crankshaft counterweight.

- Press the crankshaft against the dial indicator by hand, set the indicator to "0".

- Press the crankshaft off the dial indicator and read the value:

Axial play new:

0.090 to 0.215 mm

Axial play wear limit:

0.280 mm