Rear Brake Caliper Overview

Rear Brake Caliper Overview

• Install complete repair kit when servicing.

• Only use mineral spirits to clean brake parts.

• Apply thin coat of assembly paste (G 052 150 A2) to brake cylinders, pistons and seals.






1 Dust Cap

• Install onto bleeder valve.

2 Bleeder Valve

• 12 Nm

• Apply a thin coat of assembly paste (G 052 150 A2) to the threads before screwing in.

• SW 8

3 Brake Caliper

4 Seal

• Removing and installing, refer to => [ Rear Brake Caliper Piston ] Rear Brake Caliper Piston.

5 46 mm Piston

• Removing and Installing, refer to => [ Rear Brake Caliper Piston ] Rear Brake Caliper Piston.

• First apply thin coat of brake cylinder paste (G 052 150 A2) on piston.

6 Protective Cap

• Do not damage when installing piston.