Sill Panel Trims

Sill Panel Trims

• Removal and installation are described for the left side of the vehicle. Removal and installation for the right side are performed in the same manner.

Removal

• B-pillar trim unclipped in the transition area to the sill panel trim.

• Wheel housing trim unclipped in the transition area to the sill panel trim.

- Unclip the sill panel trim - 1 - from the B-pillar.






- Pull the sill panel trim - 1 - upward out of the mounts in the longitudinal member.

- Disconnect the harness connector, if installed.

Installation

- Installation is performed in the reverse order of removal.

• After installation, ensure that the sill panel trim is in the door seal molding.