Windshield Wiper Motor From Wiper Frame

Windshield Wiper Motor From Wiper Frame

Special tools, testers and auxiliary items required

• Pry Lever (80-200)

• Torque Wrench (V.A.G 1331)

Removing

- Remove the windshield wiper system. Refer to => [ Windshield Wiper System ] Windshield Wiper System.

- Pry the linkage - 1 - off the motor crank ball head - arrow - using (80-200).






- Turn the motor crank - 2 - and remove the 4 bolts - arrows -.






- Remove the windshield wiper motor and control module - 1 - from the wiper frame.

Installing

- Install the windshield wiper motor and control module - 1 - in the wiper frame and secure it with the 4 bolts - arrows -.






- Tighten the threaded connections to the tightening specifications given in the overview. Refer to => [ Windshield Wiper System Overview ] Windshield Wiper System Overview.

- Turn the motor crank back to its original position until the crank and the linkage - 1 - are over each other in the same angle.






- Push the linkage - 1 - onto the motor crank ball head - arrow -.