Windshield Washer Spray Nozzles

Windshield Washer Spray Nozzles

Removing

- Push the nozzle first upward - arrow A - and then toward the rear and pull it out - arrow B -.






- Release the hose clip - 1 - in the - direction of the arrow - and remove the hose connection - 2 - from the spray nozzle.






- If the vehicle has heated spray nozzles, disconnect the connector - 3 - and remove the spray nozzle - 4 -.

Installing

- Connect the connector - 3 - to the spray nozzle.






- Attach the hose - 2 - to the spray nozzle and secure it with the clip - 1 -.

- Insert the spray nozzle - 4 - into the opening starting at the top until it clicks into place.

- Adjust spray nozzles. Refer to => [ Windshield Washer System Spray Nozzles, Adjusting ] Windshield Washer System Spray Nozzles, Adjusting.