Right Interior Lamp (W17)

Right Interior Lamp (W17)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the right interior lamp - 1 - from the roof trim panel using (VAS 3409) or a screwdriver. Pay attention to the wires still connected.






- Disconnect the connector - arrow - and remove the right interior lamp - 1 -.






Installing

Install in reverse order of removal.