Glove Compartment Lamp (W6)

Glove Compartment Lamp (W6)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the lens - 1 - using (VAS 3409) or a screwdriver.






- Disconnect the connector - arrow - and remove the glove compartment lamp - 1 -.






Installing

Installation is performed in the reverse order of removal. Note the following:

- Check the glove compartment switch function. The glove compartment lamp must not light up when the cover is closed.