Lower B-Pillar Trim

Lower B-Pillar Trim

Removing

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side of the vehicle is identical.

Vehicles with Interior Monitoring (Driver Side)

- Switch off the ignition.

All Vehicles

- Remove the B-pillar upper trim. Refer to => [ B-Pillar Upper Trim, Loosening from Mounts and Securing ] B-Pillar Upper Trim, Loosening from Mounts and Securing

- Remove the trim - 1 - in the upper area form the body - arrow A -.






- Remove the trim upward out of the retainers in the sill area - arrows B -.

- Open the lid - 1 - and guide the seat belt - 2 - through it.






Installing

• Before installing, check the mounting clamps and replace if necessary.

- Install in reverse order of removal.

- Make sure, that the trim is placed in the in the door seal piping.