Diagram 4/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Accelerator pedal module, Oxygen sensor after three way catalytic converter, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

GX2 - Accelerator pedal module Locations [1][2]Accelerator Pedal Position Sensor

G79 - Accelerator pedal position sensor Locations [1][2]Accelerator Pedal Position Sensor

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor After Three way Catalytic Converter -G130-

G185 - Accelerator pedal position sensor 2 Locations [1][2]Accelerator Pedal Position Sensor

J623 - Engine control module Locations

T4v - 4-pin connector

T6h - 6-pin connector

T94 - 94-pin connector Locations

Z29 - Heater for oxygen sensor 1 after catalytic converter, on the oxygen sensor after the catalytic converter Oxygen Sensor After Three way Catalytic Converter -G130-

(E7) - Connection 87a (in Motronic multiform fuel injection wiring harness)

* - from December 2011

Previous Diagram 4/16 (Tracks 197-210)

Next Diagram 4/18 (Tracks 225-238)