Clutch Release Mechanism

Clutch Release Mechanism

Special tools, testers and auxiliary items required

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Grease for Clutch Plate Splines (G 000 100)

Removing and Installing the Clutch Release Lever with Release Bearing





- Unhook the spring - arrow 1 -.

- Remove the clutch release lever - arrow 2 - and release bearing.

- Install in the reverse order of removal.

Removing and Installing the Release Bearing





- Press the tabs - arrows - together on the backside of the clutch release lever and remove the release bearing - A - out of the clutch release lever.

- To install, press the release bearing - A - into the clutch release lever until the tabs - arrows - engage.