Transmission Cooler: Description and Operation

Automatic Transmission Fluid Cooler Overview






1 Transmission Housing

2 O-ring

• Always replace.

3 Automatic Transmission Fluid (ATF) Cooler

• Removing and installing, refer to => [ Automatic Transmission Fluid Cooler ] Service and Repair.

• Installed position, refer to => [ ATF Cooler, Installed Position ].

4 O-ring

• Always replace.

5 Washer

6 Plate Spring



• Installed position: The convex side faces toward the bolt - item 7 -

7 Bolt

• 36 Nm

ATF Cooler, Installed Position





- Install the tab - arrow B - into the opening in the transmission housing when installing the ATF cooler - 1 -.