Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump Belt

Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump Belt

When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

• Route lines of all types (for example, fuel, hydraulic, Evaporative Emission (EVAP), coolant, refrigerant, brake fluid and vacuum) and electrical wiring so that the original path is followed.

• To prevent damage to the lines, make sure there is sufficient clearance to all moving or hot components.

- Remove the ribbed belt. Refer to => [ Ribbed Belts ] Ribbed Belts.

- Remove the tensioner bolt - 2 - and the tensioner - 1 -.






- Installation is performed in the reverse order of removal. When doing this note the following:

Tightening Specifications