Ribbed Belt Tensioner, A/C Compressor Belt

Ribbed Belt Tensioner, A/C Compressor Belt

When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

• Route lines of all types (for example, fuel, hydraulic, Evaporative Emission (EVAP), coolant, refrigerant, brake fluid and vacuum) and electrical wiring so that the original path is followed.

• To prevent damage to the lines, make sure there is sufficient clearance to all moving or hot components.

- Remove the ribbed belt. Refer to => [ Ribbed Belts ] Ribbed Belts.

- Remove the tensioner bolt - 2 - and the tensioner - 1 -.






- Installation is performed in the reverse order of removal. When doing this note the following:

Tightening Specifications