Transmission Mount: Description and Operation
Engine and Transmission Mounts Overview
1 Bolt
• 60 Nm + an additional 90° (1/4) turn.
• Always replace.
• Transmission mount bracket to transmission.
• Tightening sequence, refer to => [ Transmission Mount Bracket to Transmission. ].
2 Bolt
• Tightening specification
• Pendulum support to transmission.
• Transmission with a threaded insert, refer to => [ Transmissions with a threaded insert (for example, a ) for attaching the pendulum support ].
3 Engine Mount Bracket
4 Bolt
• Tightening specification
• Engine mount bracket to engine.
5 Engine Mount
6 Bolt
• Tightening specification
• Engine mount to body.
7 Support
• Tightening specification
8 Bolt
• Tightening specification
• Support bar to body.
9 Bolt
• Tightening specification
• Support to engine mount.
10 Bolt
• Tightening specification
• Engine mount to body.
11 Bolt
• Tightening specification
• Engine mount to engine mount bracket.
12 Pendulum Support
13 Bolt
• Tightening specification
• Pendulum support to subframe.
14 Bolt
• 60 Nm + an additional 90° (1/4) turn.
• Always replace.
• Transmission mount to transmission mount bracket.
• Tightening sequence, refer to => [ Transmission Mount to the Transmission Mount Bracket. ].
15 Bolt
• Tightening specification
• Transmission mount to body.
16 Transmission Mount
17 Bolt
• 60 Nm + an additional 90° (1/4) turn.
• Always replace.
• Transmission mount bracket to transmission.
• Tightening sequence, refer to => [ Transmission Mount Bracket to Transmission. ].
18 Bolt
• 60 Nm + an additional 90° (1/4) turn.
• Always replace.
• Transmission mount bracket to transmission.
• Tightening sequence, refer to => [ Transmission Mount Bracket to Transmission. ].
19 Transmission Mount Bracket
Transmissions with a threaded insert (for example, a "Heli Coil") for attaching the pendulum support
• There are threaded inserts (for example a "Heli Coil") in the pendulum support bolt hole in the transmission.
• How to recognize: There is a shoulder at the first thread - arrow -.
• Tighten the bolts to specification. Refer to => Suspension, Wheels, Steering 40 Specifications.
• Adjust the engine/transmission mount.
Transmission Mount Bracket to Transmission.
- Replace the transmission mount bracket - 1 - to transmission bolts - arrows -.
- Tighten the bolts - arrows - hand tight.
- Tighten the bolts - arrows - to specification.
Transmission Mount to the Transmission Mount Bracket.
- Replace the transmission mount - 2 - to transmission mount bracket bolts - arrows -.
- Tighten the bolts - arrows - hand tight.
- Tighten the bolts - arrows - to specification.