Clutch Release Mechanism

Clutch Release Mechanism

Special tools, testers and auxiliary items required

• Torque Wrench (5-50 Nm) (V.A.G 1331)

• Grease for Clutch Plate Splines (G 000 100)

- Remove the clutch slave cylinder with release bearing bolts - arrows -.






Clutch Slave Cylinder with a Divided Supply Line:





The supply line is divided in the area - arrow - on some clutch slave cylinders - A -

Allocation, refer to the Parts Catalog.

Release Bearing with an Additional Plastic Washer:





How to recognize: Tabs - arrow - on the plastic washer.

Only for release bearings with an additional plastic washer: Pressure plate diaphragm spring (- arrows -) with a slightly lower installed height.





• Install the release bearing with the additional plastic washer and the pressure plate diaphragm spring with a slightly lower installed height.

Allocation, refer to the Parts Catalog.