Camshaft Axial Clearance, Checking

Camshaft Axial Clearance, Checking

Special tools, testers and auxiliary items required

• Dial Gauge Holder (VW 387)

• Dial Gauge 0-10 mm (VAS 6079)

Procedure

- Remove the guide frame. Refer to => [ Camshafts ] Service and Repair.

- Install the dial gauge 0-10 mm (VAS 6079) and the dial gauge holder (VW 387) to the cylinder head as illustrated.






- Press the camshaft against the dial gauge by hand.

- Set the dial gauge to "0".

- Press the camshaft off the dial gauge and read the value:

Intake and exhaust camshaft axial play:

• Specified value: 0.048 to 0.118 mm.

• Wear limit 0.17 mm.