External Multimedia Device Interface (R215)

External Multimedia Device Interface (R215)

Analog audio (via the AUX IN input) and digital audio (via the USB or iPod input) can be played on the radio/RNS (RX1) via the external multimedia device interface. It is also possible to operate a digital device using the radio/RNS. ID3 TAGs and titles are also displayed on the radio/RNS display.

• Since the capability to display the ID3 tags and titles on the radio/RNS display depends on the quality of the audio files being use. Refer to the Owner's Manual for the radio/RNS as well as to the Owner's Manual for the MP3 player or the iPod.

The external multimedia device interface provides an audio input (AUX IN), a USB input and an iPod connection (supply, signal and audio-in) as an interface. A specific adapter cable is used to connect the mobile device to the USB or iPod interface on the external multimedia device interface. The USB or iPod connection can be used to charge a mobile device.

External multimedia device interface installed position overview






1 Speaker System

Additional information can be found in => [ Speakers ] Speakers.

2 Radio/RNS (RX1)

3 Multifunction Steering Wheel

Additional information can be found in => [ Multifunction Steering Wheel Overview ] Multifunction Steering Wheel Overview.

4 CAN Bus

5 External Audio Source Connection (R199)

Additional information can be found in => [ External Audio Source Connection (R199) ] External Audio Source Connection (R199).

6 LF Line

• Between the external audio source connection (R199) and external multimedia device interface (R215)

7 Input Devices

• MP3-Player

• Memory sticks

• iPod

8 Adapter Lead

• Depending on the input device to be connected

9 External Multimedia Device Interface (R215)

• Connector assignment, refer to => [ External Multimedia Device Interface (R215) Connectors ] External Multimedia Device Interface (R215) Connectors

10 Power Supply Connection

11 LF Line

• Between the external multimedia device interface (R215) and radio/navigation (RX1)

• Familiarity with the functions and operation is essential in the event of customer concerns. Refer to Owner's Manual.

• Additional information, refer to the Owner's Manual,.

• Use the Vehicle Diagnostic Tester for Servicing or Troubleshooting.

• Check all vehicle equipment (clock, Convenience System, etc.) after connecting the battery.

Removing

- Remove the connected adapter cables from the external multimedia device interface.

- Remove the rear trim from the center console.

- Remove the screw - 1 -.






- Remove the external multimedia device interface - 2 - from the center - 3 - to the rear.

- Unlock the connector - arrow - and disconnect the connector - A - from the external multimedia device interface.






Installing

Install in reverse order of removal.

External Multimedia Device Interface, Coding

- Select "Guided Fault Finding" in the Vehicle Diagnostic Tester.

- Press "GO TO".

- Select "Functions/Component selection".

- Select "Body".

- Select "Electrical Equipment".

- Select "01 - Systems capable of self-diagnosis".

- Select "external multimedia device interface".

- Select "external multimedia device interface functions".

- Select "coding external multimedia device interface".

External Multimedia Device Interface (R215) , Output Diagnostic Test Mode

- Select "Guided Fault Finding" in the Vehicle Diagnostic Tester.

- Press "GO TO".

- Select "Functions/Component selection".

- Select "Body".

- Select "Electrical Equipment".

- Select "01 - Systems capable of self-diagnosis".

- Select "external multimedia device interface".

- Select "external multimedia device interface functions".

- Select "left and right audio channel output diagnostic test mode".