Evaporative Emission Control Canister: Service and Repair

EVAP Canister

Removing

- Remove the lower right underbody panel, if equipped.

Vehicles with engine code CBTA:

- Remove the lines - 1, 2 and 3 -. To do so, press in or press together the securing ring.






- Remove the bolts - arrows - and remove the EVAP canister - 4 -.

Vehicles with engine code CBUA:

- Remove the lines - 1, 2 and 3 -. To do so, press in or press together the securing ring.






- Remove the bolts - arrows - and remove the EVAP canister - 4 -.

Installing

Installation is performed in the reverse order of removal. When doing this note the following:

• Attach the ventilation lines so that it audibly latches.

Tightening Specification