Windshield Washer Fluid Reservoir Filler Tube

Windshield Washer Fluid Reservoir Filler Tube


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the connecting pipe - 3 - from the filler tube - 2 - on the reservoir.






- Remove bolt - 1 -.

- Unclip the hose bracket from the filler tube - 2 - and remove it from the vehicle.

Installing

Installation is performed in the reverse order of removal. Note the following:

The casting mark on the bottom side of the filler tube must be inserted into the hole - arrow -.






Connecting tube - 1 - and filler tube - 2 - must be joined so that the guides - arrows - engage in each other.






- Tighten the threaded connections to the tightening specification. Refer to => [ Windshield Washer System Overview ] Windshield Washer System Overview.