Torque Converter Bearing/Bushing: Service and Repair

Crankshaft Needle Bearings

Special tools, testers and auxiliary items required

• Centering Mandrel (3176) or

• Drift (VW 207 C)

• Puller, for example, Kukko Extractor 14.5-18.5 mm (21/2)

• Puller (T10055)

Conditions:

• The transmission is removed.

Removing

- Remove the needle bearing using a commercially available puller, for example kukko extractor 14.5-18.5 mm (21/2) - arrow -, the adapter (T10055/3) and the puller (T10055).






Installing

• The side of the needle bearing with writing on it must be readable when installed.

- Drive in the bearing using the drift (VW 207 C) or the centering mandrel (3176).






Installed depth:






• Dimension: 1.5 to 1.8 mm - a -