Ribbed Belt Pulley Without Free-Running Hub

Ribbed Belt Pulley Without Free-Running Hub

Special tools, testers and auxiliary items required

• Socket (VAS 3310)

• Torque Wrench (V.A.G 1332)

Removing

- Remove the generator. Refer to (2.0L FSI)=> [ Generator ] Generator, (2.5L)=> [ Generator ] Generator, (2.0L TFSI)=> [ Generator ] Generator or (2.0L TDI)=> [ Generator ] Generator.

- Secure the generator in a vice by the mounting points.

- Remove the ribbed belt pulley nut from the generator shaft using the (VAS 3310).






Installing

Installation is performed in the reverse order of removal. Note the following:

- Tighten the threaded connections to the tightening specification. Refer to (2.0L FSI)=> [ Generator Overview ] Generator Overview, (2.5L)=> [ Generator Overview ] Generator Overview, (2.0L TFSI)=> [ Generator Overview ] Generator Overview or (2.0L TDI)=> [ Generator Overview ] Generator Overview.