Tail Lamps in Side Panel

Tail Lamps in Side Panel


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the cover inside the side trim panel.

- Disconnect the connector - 1 -.






- Remove the screw - 2 - from the tail lamp assembly - 3 - and then remove the tail lamp assembly - 3 -.

Installing

Install in reverse order of removal, noting the following:

The tail lamp assembly connector must engage "audibly" in side panel when connecting.

- Check the gap dimensions on the body.

- Tighten the threaded connections to the tightening specification. Refer to => [ Tail Lamps in Side Panel Overview ] Tail Lamps in Side Panel Overview.