A/C System Controls, Climatic

A/C System Controls, Climatic

Removing

• The controls consist of two separable housings. Before removing controls, bring rotary buttons into the following position:

• Heater control to cold.

• Blower to 0.

• Air flow direction to footwell.

- Remove the radio.

- If the vehicle does not have a radio, remove the trim from the center of the instrument panel.






- Remove the bolts - 2 - (4.2 x 45) and - 3 - (4.2 x 16) and the controls - 1 - from the center console.






- Release the connector - A - by pulling it in direction of arrow - 1 -.

- Press connector release - B - toward the connector - arrow 2 - and disconnect the connector - C -.

- Release the connector - D - and then disconnect it.

Installing

Install in reverse order of removal. Be sure install the control knobs in the same position they were in when they were removed.