Removal and Replacement

Engine and Transmission Mount Overview






1 Bolt

• Tightening specification, refer to one of the following:

=> Manual Transmission Specifications.

=> Direct Shift Gearbox Specifications.

• For the transmission mount bracket to the transmission.

2 Bolt

• 50 Nm + 90° (1/4) additional turn.

Always replace.

• For the pendulum support to the transmission.

3 Engine Mount Bracket

4 Bolt

• 40 Nm + 180° (1/2) additional turn.

Always replace.

• For the engine mount bracket to the engine.

5 Engine Mount

6 Bolt

• 40 Nm + 90° (1/4) additional turn.

Always replace.

• For the engine mount to the body.

7 Bracket

8 Bolt

• 20 Nm + 90° (1/4) turn.

Always replace.

• For the bracket to the body.

9 Bolt

• 20 Nm + 90° (1/4) additional turn.

Always replace.

• For the bracket to the engine mount.

10 Bolt

• 40 Nm + 90° (1/4) turn.

Always replace.

• For the engine mount to the body.

11 Bolt

• 60 Nm + 90° (1/4) additional turn.

Always replace.

• For the engine mount to the engine mount bracket.

12 Pendulum Support

• First, secure the pendulum support to the transmission, and then to the subframe.

13 Bolt

• 100 Nm + 90° (1/4) additional turn.

Always replace.

• For the pendulum support to the subframe.

14 Bolt

• 60 Nm + 90° (1/4) additional turn.

Always replace.

• For the transmission mount to the transmission mount bracket.

15 Bolt

• 40 Nm + 90° (1/4) additional turn.

Always replace.

• For the transmission mount to the body.

16 Transmission Mount

• The graphic shows the Direct Shift Gearbox (DSG).

17 Bolt

• Tightening specification, refer to one of the following:

=> Manual Transmission Specifications.

=> Direct Shift Gearbox Specifications.

• For the transmission support to the transmission.

18 Transmission Mount Bracket