Diagram 59/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Glove compartment lamp switch, Engine hood contact switch, Vehicle electrical system control module, Driver windshield wiper motor, Glove compartment lamp, Left washer nozzle heater, Right washer nozzle heater





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E26 - Glove compartment lamp switch

F266 - Engine hood contact switch Locations

G397 - Rain/light recognition sensor

J519 - Vehicle electrical system control module Overview Of Control Modules

T2bp - Double connector

T2br - Double connector

T2bt - Double connector

T2bu - Double connector

T2n - Double connector, near the headlamps

T3ae - 3-pin connector

T4p - 4-pin connector

T52a - 52-pin connector Overview Of Control Modules

T52b - 52-pin connector Overview Of Control Modules

V216 - Driver windshield wiper motor

W6 - Glove compartment lamp

Z20 - Left washer nozzle heater

Z21 - Right washer nozzle heater

(80) - Ground connection 1 (in instrument cluster wiring harness)

(124) - Ground connection (in right engine compartment wiring harness)

(A184) - Hood contact switch connection (in instrument panel wiring harness)

(C53) - Positive connection (x) (in heated spray nozzle wiring harness)

Previous Diagram 59/15 (Tracks 183-196)

Next Diagram 59/17 (Tracks 211-224)