Diagram 23/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Transverse acceleration sensor, Rotation rate sensor, ESP sensor unit, Vacuum sensor, ABS control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G200 - Transverse acceleration sensor Locations

G202 - Rotation rate sensor Locations

G419 - ESP sensor unit

G608 - Vacuum sensor Locations [1][2]Brake Booster Vacuum Sensor

J104 - ABS control module Overview Of Control Modules [1][2]Diagrams

J623 - Engine control module Overview Of Control Modules

N135 - Right rear ABS outlet valve

N136 - Left rear ABS outlet valve

T47 - 47-pin connector

V64 - ABS hydraulic pump Locations

(43) - Ground connection on A-pillar, lower right Locations

(366) - Ground connection 1 (in main wiring harness)

(388) - Ground connection 23 (in main wiring harness)

(638) - Ground connection on right A-pillar Locations

(A199) - Positive connection 4 (15a) (in instrument panel wiring harness)

(B131) - Connection 54 (in interior wiring harness)

* - Refer to applicable engine wiring diagram

*2 - Only for vehicles with a hydraulic brake booster

*3 - only for vehicles with High equipment (AW1)

*4 - only for vehicles with Low equipment (AW0)

Previous Diagram 23/3 (Tracks 15-28)

Next Diagram 23/5 (Tracks 43-56)