Brake Pedal Overview

Brake Pedal Overview


The path of the brake pedal must not be shortened via extra floor mats.

Grease all bearing areas using grease (G 000 602) before assembling.






1 Mounting Bracket

• Removing and installing, refer to => [ Brake Pedal Mounting Bracket ] Brake Pedal Mounting Bracket.

2 Nut

• 25 Nm

• Quantity: 6

• Always replace if removed.

• Follow tightening sequence. Refer to=> [ Follow the tightening sequence ] Brake Pedal Mounting Bracket.

3 Bushing

4 Nut

• 25 Nm

• Always replace if removed.

5 Buffer Stop

6 Brake Pedal

• Removing and installing, refer to => [ Brake Pedal ] Brake Pedal.

7 Cover

8 Ball Socket

9 Wheel Hub Support

• For the ball head on the brake booster push rod.

• Remove the ball head from the mount. Refer to => [ Brake Pedal and Brake Booster, Separating and Connecting ] Brake Pedal and Brake Booster, Separating and Connecting.

• Clip the ball head to the mount. Refer to => [ Brake Pedal and Brake Booster, Separating and Connecting ] Brake Pedal and Brake Booster, Separating and Connecting.

10 Bolt

11 Pivot Pin