Rear Torsion Beam Axle ABS Components Overview, with Drum Brake

Rear Torsion Beam Axle ABS Components Overview, with Drum Brake






1 Rear ABS Wheel Speed Sensor

• Clean the inside of the hole and coat it with hot bolt paste (G 052 112 A3) before installing the sensor.

• Removing and installing, refer to => [ Rear ABS Wheel Speed Sensor, Torsion Beam Axle with Drum Brake ] Rear ABS Wheel Speed Sensor, Torsion Beam Axle with Drum Brake.

2 Bolt

• 8 Nm

3 Wheel Bearing Unit

• The ABS sensor ring is installed in the wheel bearing.