Buttons In Center Console Storage Compartment

Buttons In Center Console Storage Compartment


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( Trim Removal Wedge (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Depending on the vehicle equipment level, the following switches may be installed inside the center console storage compartment:

• Start System Button (E378)

• Parking Aid Button (E266)

• ASR/ESP Button (E256)

• Removing and installing a single button (start system button) is described here. Removing and installing the other buttons is identical.

Removing

- Carefully pry the selector lever boot out of the center console - arrows -.






- Remove bolts - arrows - (2 Nm).






- Remove the ashtray from the center console.

- Disconnect the connectors - arrows -.






- Open the tabs - arrows - and remove the start system button.






Installing

Install in reverse order of removal.