Filler Tube

Filler Tube


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the connecting pipe - 1 - from the filler tube - 3 - on the container.






- Remove bolt - 2 -.

- Unclip the hose bracket from the filler tube - 3 - and remove it from the vehicle.

Installation

Installation is performed in the reverse order of removal. Note the following:

The casting mark on the bottom side of the filler tube must be inserted into the hole - arrow -.






Connecting tube - 1 - and filler tube - 2 - must be joined so that the guides - arrows - engage in each other.






- Tighten the screw to 4 Nm.