Headlamp Spray Nozzle Lift Cylinder

Headlamp Spray Nozzle Lift Cylinder


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the spray nozzles with the cap - 1 - from the bumper cover to the stop.






- Remove the cap - 1 - from the mountings - arrows - on the spray nozzle holder.

- Remove the front bumper cover.

- Remove the clip - 4 - from the hose connection.






- Remove the hose connection from the lift cylinder - 2 -.

- Remove the screw - 1 -.

- Remove the lift cylinder - 2 - from the bracket - 3 -.

Installation

Installation is performed in the reverse order of removal. Note the following:

- The hose to lift cylinder must be clipped into hose bracket.

- Tighten the threaded connections to the tightening specifications. Refer to => [ Headlamp Washer System Overview ] Headlamp Washer System Overview.

- Bleed the headlamp washer system. Refer to=> [ Headlamp Washer System, Bleeding ] Procedures.