Diagram 120/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver side airbag crash sensor, Front passenger side airbag crash sensor, Airbag control module, Driver thorax airbag igniter, Front passenger thorax airbag igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G179 - Driver side airbag crash sensor Locations Driver Side Airbag Crash Sensor -G179- and Front Pass Side Airbag Crash Sensor -G180-

G180 - Front passenger side airbag crash sensor Locations Driver Side Airbag Crash Sensor -G179- and Front Pass Side Airbag Crash Sensor -G180-

J234 - Airbag control module, in the front center console Locations

N199 - Driver thorax airbag igniter Airbag Component Locations Front Pass Thorax Airbag Igniter -N200- and Driver Thorax Airbag Igniter -N199-

N200 - Front passenger thorax airbag igniter Airbag Component Locations Front Pass Thorax Airbag Igniter -N200- and Driver Thorax Airbag Igniter -N199-

T3k - 3-pin connector, under the driver seat

T3l - 3-pin connector, under the front passenger seat

T28 - 28-pin connector, on the left A-pillar

T28a - 28-pin connector, on the right A-pillar

T75 - 75-pin connector

(109) - Ground connection (in airbag wiring harness)

Previous Diagram 120/4 (Tracks 29-42)

Next Diagram 120/6 (Tracks 57-70)