Tail Lamps

Tail Lamps


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Push the side trim panel/cover to the side.

- Disconnect the connector - 3 -.






- Remove the nuts - 2 - and - 4 - from the tail lamp assembly - 1 -.

- Remove the tail lamp assembly - 1 -.

Installation

Installation is performed in the reverse order of removal. Note the following:

- Tighten the threaded connections to the tightening specification. Refer to => [ Tail Lamps Overview ] Tail Lamps Overview.

• Connector for tail lamp assembly must engage audibly when connecting.

- Check the gap dimensions between the tail lamp assembly and the body after installing the tail lamp assembly.