Muffler: Service and Repair

Muffler Overview






1 Securing Strap

• For the fuel tank.

2 Suspended Mount

• Replace if damaged.

3 Bolt

• 23 Nm

• Always replace.

4 Retaining Loop

• Replace if damaged.

5 Exhaust Pipe

6 Bolt

23 Nm

7 Suspended Mount

• Replace if damaged.

8 Rear Muffler

• For repairs, replace each separately.

• Exhaust system, separating and connecting. Refer to => [ Exhaust System, Separating and Connecting ] Exhaust System, Separating and Connecting.

• Align the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] Exhaust System, Installing.

• Exhaust system, checking for leaks. Refer to => [ Exhaust System, Checking for Leaks ] Testing and Inspection.

9 Nut

23 Nm

10 Repair Clamping Sleeve

• For individual replacement of exhaust pipe and rear mufflers.

• Note the installed position, refer to => [ Repair Clamping Sleeve Installed Position ].

• Exhaust system, separating and connecting. Refer to => [ Exhaust System, Separating and Connecting ] Exhaust System, Separating and Connecting.

• Align the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] Exhaust System, Installing.

• Tighten the nuts evenly

11 Tunnel Bridge

Repair Clamping Sleeve Installed Position





- When installing the clamping sleeve, ensure that the bolt end - arrow - does not project beyond the lower edge of clamping sleeve:

• Threaded connection points toward the right.

• Tighten the threaded connections equally to 23 Nm.