Diagram 118/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Right rear ABS wheel speed sensor, Right front ABS wheel speed sensor, Left rear ABS wheel speed sensor, Left front ABS wheel speed sensor, ABS control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations [1][2]Brake Light Switch

G44 - Right rear ABS wheel speed sensor Locations [1][2]Diagrams

G45 - Right front ABS wheel speed sensor Locations [1][2]Diagrams

G46 - Left rear ABS wheel speed sensor Locations [1][2]Diagrams

G47 - Left front ABS wheel speed sensor Locations [1][2]Diagrams

J104 - ABS control module Locations [1][2]Diagrams

J623 - Engine control module Locations

N133 - Right rear ABS inlet valve

N134 - Left rear ABS inlet valve

N225 - Driving dynamics regulation switch valve 1

N226 - Driving dynamics regulation switch valve 2

T4y - 4-pin connector

T47 - 47-pin connector

(B131) - Connection (54) (in interior wiring harness)

(D146) - Left rear speed sensor positive connection (in engine compartment wiring harness)

(D147) - Left rear speed sensor negative connection (in engine compartment wiring harness)

(D148) - Right rear speed sensor positive connection (in engine compartment wiring harness)

(D149) - Right rear speed sensor negative connection (in engine compartment wiring harness)

(D184) - Left front speed sensor positive connection (in engine compartment wiring harness)

(D185) - Left front speed sensor negative connection (in engine compartment wiring harness)

* - Refer to applicable engine wiring diagram

Previous Diagram 118/2 (Tracks 1-14)

Next Diagram 118/4 (Tracks 29-42)