Center A-pillar Trim

Center A-Pillar Trim

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Remove side instrument panel cover. Refer to => [ Instrument Panel Side Covers ] Instrument Panel Side Covers.

- Remove trim securing clip - 1 - out of mount - 2 - of upper A-pillar trim - arrow A -.






- Remove trim from door seal piping.

- Pull trim upward out of lower A-pillar trim - arrow B -.

Installing

- Install in reverse order of removal.

• Ensure trim is in door seal molding after installation.