Antenna Amplifier: Service and Repair

Antenna Amplifier (R24)/Antenna Amplifier 2 (R111)

The antenna amplifier / antenna amplifier 2 are located on the left and right C-pillars. Removal and installation is the same for both.

Removing


• Turn off the ignition and all electrical consumers.

• Remove the key.

- Remove the C-pillar trim.

- Disconnect the connectors - 1 - and - 2 -.






- Remove the screw - 4 - and then remove the antenna amplifier - 3 - from the C-pillar.

Installing

Install in reverse order of removal.

Torque specifications: 2 Nm