Clutch Master Cylinder: Service and Repair

Master Cylinder

Special tools, testers and auxiliary items required

• Pliers (T10005)

Removing

- Remove the bracket, refer to => [ Mounting Bracket ] Mounting Bracket

- Unlock the mount for the master cylinder actuator rod using the (T10005).






- Place a spacer - A - between the clutch pedal and the stop and push the clutch pedal down as far as the spacer.






• Spacer length = approximately 40 mm (for example, 1/2 socket insert)

- Unlock the securing clip - B - and remove the clutch master cylinder from the bracket - arrow 1 - and - arrow 2 -.

Installing

• Move the clutch pedal into its rest position.

- Attach the mount - 2 - to the master cylinder actuator rod - 1 -.






- Place a spacer - A - between the clutch pedal and the stop and push the clutch pedal down as far as the spacer.






• Spacer length = approximately 40 mm (for example, 1/2 socket insert)

- Lock the clutch master cylinder to the bracket - arrow 1 - and - arrow 2 -.

- Push the clutch master cylinder actuator rod - 1 - in direction of - arrow - until the mount - 2 - audibly engages inside the clutch pedal.






- Install the bracket, refer to => [ Mounting Bracket ] Mounting Bracket.