Vacuum Pump: Service and Repair

Brake System Vacuum Pump V192

Only on gas vehicles with a Direct Shift Gearbox (DSG(R)) and without a hydraulic brake booster.

Component location of the brake system vacuum pump is located on the front of the DSG(R), in the direction of travel.

It is not possible to service the brake system vacuum pump. If there is a malfunction, replace the pump.

Removing

• The illustrations show the brake system vacuum pump horizontally. It is installed vertically on other engine/transmission combinations.

- Disconnect the vacuum hose - 1 - from the pump.






- Disconnect the connector - 2 - from the pump.

- Remove the remaining connectors and wires from the bracket - 3 -.

- Remove the bracket bolts - arrows - and bracket - 3 - with the pump.

- Then, remove the pump bolts - arrows - and pump - 1 - from the bracket - 2 -.






Installing

Install in the reverse order of removal.